Landoll 5531 Grain Drill Manuel d'utilisateur télécharger pdf (Page 36)

4-8 F-716-1213 Edition

OPERATION AND MAINTENANCE

Figure 4-5: Hitch and Safety Chain

Transporting the Grain Drill

1. Check and follow all federal, state, and local

requirements before transporting the Grain Drill.

2. The Grain Drill should be transported only by a

tractor required for field operation. The implement

weight should not exceed more than 1.5 times the

tractor weight. Unless noted on the implement,

maximum transport speed is 20 mph for the

implement and is designated on the speed

identification symbol (SIS) located on the front of the

implement (See Figure 4-5.)



CAUTION

3. When towing equipment in combination, the

maximum equipment ground speed shall be the

limited to the lowest specified ground speed of any of

the towed implements.

4. Maximum transport speed shall be the lesser of

travel speed specified in the operators manual,

speed identification symbol, information sign of

towed implement, or limit of road condition.

SMV SIGN

SPEED

IDENTIFICATION

SYMBOL (SIS)

DECAL

HITCH WELDMENT

SAFETY CHAIN

5531 hitch and safety chain

Excessive speed may result in loss of control of

the tractor and implement, reduced braking, or

failure of the implement tires or structure. Do not

exceed the implement maximum specified

ground speed regardless of the capability of the

maximum tractor speed.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 77 78

Pas de commentaire

Landoll 5531 Grain Drill Manuel d'utilisateur Page 36