Landoll ICON 1632RS Grader Manuel d'utilisateur télécharger pdf (Page 17)

SAFETY INFORMATION

3-7

Safety Decals

See Figures 3-3 through 3-5 for decal locations.

NOTE

Replace all missing or damaged safety signs/decals.

Pinching or Crushing Danger

1. Moving parts that are operated by hydraulic pressure

can cause serious injury or death.

2. Use extreme caution when working around any

moving part.

3. Do not allow any person to be on or near the

machine while it is in motion.

Moving Parts

1. Be aware of all moving parts of the machine.

2. Do not allow anyone to be near, or on the machine

while operating any moving part.

Danger

1. Read and understand the operator’s manual before

using the machine.

2. Allow no person to operate the machine before

reading the manual and being instructed on proper

operation.

Caution

1. This machine is designed for off road use only.

Danger, High Pressure

1. High pressure fluid can cause serious damage to

hands and eyes.

2. Carefully relieve pressure before attempting any

3. adjustments.

4. Tighten all fittings before applying pressure.

NOTE

If fluid is sprayed into eyes or injected into skin, see a

doctor immediately!

Horsepower Limits

1. Each machine is rated for it’s horsepower limits.

2. If the posted limits are exceeded, damage to the

machine may occur, and the Warranty will void.

NOTE

300 maximum engine h.p. is only applicable if the grader

is equipped with the 2nd cylinder.

Lubrication

1. Lubrication information is placed near each zerk.

2. Proper maintenance should be followed to assure the

working life of the machine.

Proper Notification

1. Contact the proper authorities before you dig.

2. When digging in a populated area, it is

recommended that a call be made to area utilities to

establish the local of any buried pipes, lines, or

structures. When digging in open areas, research

and know the local of any underground structures

and objects.

3. Striking the blades or bits against buried objects can

cause damage to the machine, and is considered as

abuse to the scraper.

Storage Recommendations

NOTE

If the machine is being stored or not in use for a long

period of time, it is recommended that a coating of heavy

grease be applied to the exposed chrome cylinder rods.

This will help to protect the coating from moisture and

rust during this time.



CAUTION



Be certain to remove the cylinder stops before

using the grader. The stops are to be pinned in

the holder, located on the rear frame.

Failure to remove the stops will result in damage

to the stop or cylinder.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 63 64

Commentaires sur ces manuels

Pas de commentaire

Landoll ICON 1632RS Grader Manuel d'utilisateur Page 17

Commentaires sur ces manuels