Landoll 6230 Disc Manuel d'utilisateur télécharger pdf (Page 39)

ASSEMBLY INSTRUCTIONS

3-13

Electronic Depth Stop (Option)

1. Attach the electronic depth control mounting bracket

to the middle cross bar of the center frame using a

5/8 x 4 x 6-1/2 u-bolt and hex lock nuts (See

Figure 3-7.) See Figures 2-1 thru 2-4 for proper

placement. The depth control lever should line-up

with the depth stop mounting plate on the center lift.

2. Adjust the control rod linkage to 5-1/2" length and

connect the depth control lever to the depth stop

mounting plate.

3. Route the electrical cable from the front hitch,

through the hose loops and connect to the depth

control switch.

4. Fully retract (turn clockwise) the hydraulic depth

stop, so that it does not interfere with the electronic

depth stop operation.

5. Read and follow tractor operating instructions for

setting and adjusting depth of the electronic depth

control.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 95 96

Pas de commentaire

Landoll 6230 Disc Manuel d'utilisateur Page 39