Landoll 6230 Disc Manuel d'utilisateur télécharger pdf (Page 61)

ASSEMBLY INSTRUCTIONS

3-35

Figure 3-26: LED Light and SMV Harness Wire Designations (After August, 2013)

LED Light and SMV Bracket

Installation (After August, 2013)

NOTE

Refer to pages 2-4 thru 2-7 for light bracket placements.

1. Attach left and right light brackets with reflectors to

center frame using u-bolts and hex lock nuts (See

Figure 3-25.)

2. Attach ag amber single LED lamps to light brackets

using 1/4-20 x 1-1/4 hex head cap screws and hex

lock nuts.

3. Attach left tail light mount to frame assembly using

u-bolt and 5/8-11 flange head serrated nuts.

4. Attach right tail light mount and ag flasher control

module to frame assembly using u-bolt and 5/8-11

flange head serrated nuts. Be sure that the control

module is set so that the 6 pin connector faces the

right side of the machine.

5. Attach the ag red single LED lamps to tail light

mounts using 1/4-20 x 1-1/4 hex head cap screws

and hex lock nuts.

IMPORTANT

Make sure lights are positioned for maximum

visibility from the rear.

6. Install the rear warning light harness to the frame.

Connect 2 pin and 3 pin ends to each of the warning

lights. Connect 6 pin to the ag flasher control module.

See Figure 3-26 for LED harness wire

designations.

7. Attach front warning harness to frame. Connect 4 pin

end to the ag flasher control module.

8. Insure that the harnesses are clear of any moving

parts and secure the harnesses with tie wraps

provided.

9. Install the stor-away holder to hose holder on hitch

with 1/4-20 x 3/4 hex head cap screws and hex lock

nuts.

10. Attach SMV emblem and mounting bracket to rear

center frame bar using u-bolt, 1/4-20 x 3/4 hex head

cap screws, and hex lock nuts. The SMV sign should

be centered on the back bar of the frame.

m177034 elect wire designations op

7-PIN

CONN

GROUND

WORK LAMPS

LEFT FLASHING

& TURN

STOP LAMPS

RIGHT FLASHING

& TURN

TAIL LAMPS

SWITCHED

POWER (12V)

4-PIN

TOWER

GROUND

BLACK

YELLOW

RED

GREEN

BROWN

BLUE

CIRCUIT WIRE

COLOR

BLACK

LEFT TURN

WHITE

GROUND

BROWN

TAIL LIGHT

YELLOW

LEFT TURN

GREEN

RIGHT

RED

RIGHT

TURN

2-PIN

TOWER

3-PIN

TOWER

6-PIN

SHROUD

3-PIN

TOWER

2-PIN

TOWER

FRONT WARNING

HARNESS

REAR WARNING

HARNESS

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 95 96

Commentaires sur ces manuels

Pas de commentaire

Landoll 6230 Disc Manuel d'utilisateur Page 61

Commentaires sur ces manuels

Produits connexes et manuels pour Machines spéciales Landoll 6230 Disc