Landoll 6230 Disc Manuel d'utilisateur télécharger pdf (Page 41)

ASSEMBLY INSTRUCTIONS

3-15

Fold Cylinder Mount

1. For 21’-23’ models, assemble the fold cylinder mount

to the rear cross bar where the center rear gangs

meet in the frame (See Figure 3-8.) Attach using 5/8

x 4 x 6-1/2 u-bolts and hex lock nuts.

2. For 26’ models, assemble the fold cylinder mount to

the middle cross bar of the center frame (over the

leveler spring assembly) using 5/8 x 4 x 6-1/2 u-bolts

and hex lock nuts (See Figure 3-8.)

3. For 29’ models, assemble two fold cylinder mounts to

the center frame using 5/8 x 4 x 6-1/2 u-bolts and hex

lock nuts (See Figure 3-8.) Place one mount on the

middle cross bar over the leveler spring assembly,

and the other mount over the rear cross bar where

the center rear gang meets.

4. For 30’ models, install the fold cylinder mount over

the middle center frame cross bar (over the leveler

spring assembly) (See Figure 3-8.) Attach using 5/8

x 4 x 7-3/4 u-bolts and hex lock nuts. Position the fold

cylinder mount so that the hose loops point forward.

5. For 33’-36’ models, assemble two fold cylinder

mounts to the center frame using 5/8 x 4 x 7-3/4

u-bolts and hex lock nuts. Place one mount on the

middle cross bar over the leveler spring assembly,

and the other mount behind the rear cross bar where

the center rear gangs meet. For proper placement,

see Figure 3-8. Position both fold cylinder mounts so

that the hose loops point forward.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 95 96

Pas de commentaire

Landoll 6230 Disc Manuel d'utilisateur Page 41