Landoll 6230 Disc Manuel d'utilisateur télécharger pdf (Page 70)

4-2 F-440-0113 Edition

OPERATION AND MAINTENANCE

Tractor Preparation

The Landoll 6230 Disc is designed to be pulled by tractor

equipped with a double lip or clevis type hitch. If your

tractor is not equipped as such, you need to purchase the

hitch from your local tractor dealer. If your Disc is

equipped with the clevis option, this should be removed.

The clevis option is only for transport use.

Before attaching the Disc, prepare the tractor as follows:

1. Inflate the rear tractor tires equally and add ballast

according to the tractor operator’s manual.

2. Lock the tractor drawbar in the center position.

Disc Preparation

1. Prior to operating the 6230 Disc, inspect it thoroughly

for good operating condition.

2. Replace worn or missing parts.

3. When the machine is new, check the bolt tightness

after a few hours of operation. Tighten any loose nuts

or bolts. Check the lift wheel lug bolts daily.

4. Check the lift wheel tire inflation. Inflate all tires

equally to avoid side draft. Follow the tire

manufacturer’s recommended pressures listed on

the sidewall of the tires.

5. Check disc scrapers for proper adjustment to the disc

blade (See Figure 4-1.)

6. Lubricate the machine (See Figure 4-21.) (Also

refer to “Lubrication Maintenance” on page 4-23).

Figure 4-1: Disc Scraper Adjustment to Disc Blade

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 95 96

Pas de commentaire

Landoll 6230 Disc Manuel d'utilisateur Page 70