Landoll 6230 Disc Manuel d'utilisateur télécharger pdf (Page 72)

4-4 F-440-0113 Edition

OPERATION AND MAINTENANCE

2. The hydraulic system is not filled with oil and should

be purged of air before transporting and field

operations. Carefully hitch the disc to the tractor and

connect the hydraulic lift hoses. Check to make sure

the tractor hydraulic reservoir is full of the

manufacturer’s recommended oil. Slowly raise the

machine, and continue to hold the hydraulic lever

until all lift cylinders are fully extended. With all

cylinders fully extended remove the 1-3/8 X 10

transport lockouts (See Figure 4-3.). Store transport

lockouts as shown in Figure 4-4. Lower and raise the

unit to verify that all cylinders are working

simultaneously throughout the stroke. If the cylinders

are not working evenly or together, fully extend the lift

cylinders and continue to hold the lever to purge any

remaining air. Do not loosen any hoses or fittings.

Recheck tractor reservoir to make sure it is within

operating limits.

3. Always fully extend the cylinders and hold the lever

to ensure the cylinders are rephased before starting

any field operation. This will keep all cylinders in time

and frame sections level when operating.

Figure 4-3: Installed Transport Locks

Figure 4-4: Stored Transport Locks

1-3/8 x 10 TRANSPORT

LOCKOUT

L PIN

1/8 HAIR PIN

6230translock2

6230translock1

1-3/8 x 10 TRANSPORT

LOCKOUT

L PIN

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 95 96

Pas de commentaire

Landoll 6230 Disc Manuel d'utilisateur Page 72