Landoll 2131 Wing Coulter Chisel Manuel d'utilisateur télécharger pdf (Page 56)

3-20 F-721-0513 Edition

ASSEMBLY INSTRUCTIONS

Figure 3-12: Hitch Hose Clamps and Color Designation

Hydraulic Installation

NOTE

See Figures 3-13 thru 3-18 for coulter lift, wheel lift, and

fold hydraulic diagrams.

1. On all models, install the 16 port manifold to the

manifold bracket on the front center frame tube using

1/2-13 x 3-1/2 hex head cap screws and hex lock

nuts (See Figure 3-11.)

2. On all models, install 8 port manifold to the manifold

bracket on the center frame weldment near the right

side of the rear fold anchor using 1/2-13 x 3-1/2 hex

head cap screws and hex lock nuts (See

Figure 3-11.)

3. On 2131-21, 2131-23, and 2131-25 models, install

second 8 port manifold to the manifold bracket on the

center frame weldment near the right side of the front

fold anchor using 1/2-13 x 3-1/2 hex head cap

screws and hex lock nuts (See Figure 3-11.)

4. Install 90

adapter in port N in the rear of the

manifold.

5. Install straight adapters in any manifold port that has

a hose connection.

6. Verify that limit valve is installed below the depth stop

bracket welded to the frame. If not, refer to “Depth

Stop Tube Assembly” on page 3-6.

7. Install coulter lift, wheel lift, and fold system hoses

(See Figures 3-13 thru 3-18.)

8. Hold each system of hoses in place using 3/8-16 x 4

hex head cap screw, hose clamps, and hex lock nut

(See Figure 3-12.)

9. Install plugs in any remaining open manifold or valve

ports.

10. Install hose wraps around system hoses per hose

identification decal near hose couplers, putting both

hoses inside wrap(See Figure 3-12.)

3/8-16 X 4 HEX

HEAD CAP SCREW

HOSE CLAMPS

3/8-16 HEX LOCK NUT

2130 hitch hose clamps

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 97 98

Commentaires sur ces manuels

Pas de commentaire

Landoll 2131 Wing Coulter Chisel Manuel d'utilisateur Page 56

Commentaires sur ces manuels

Produits connexes et manuels pour Machines spéciales Landoll 2131 Wing Coulter Chisel