Landoll 2131 Wing Coulter Chisel Manuel d'utilisateur télécharger pdf (Page 90)

4-14 F-721-0513 Edition

OPERATION AND MAINTENANCE

4. Check that tires are of proper size, load rating, and

inflated to manufacture specifications before

transporting. Check wheel lug bolts to insure

tightness.

5. Know the transport heights and widths of the unit

before transporting. Attachments such as leveling

harrows can increase the transport dimensions of the

implement. Use caution when transporting near

bridges and power lines.



WARNING

6. Raise the unit to full transport height.

7. Install transport locks on both lift cylinders. Do not

depend solely on implement hydraulics for transport.

(See Figure 4-13.)



WARNING

8. Transport during daylight hours whenever possible.

Always use flashing warning lights, except where

such use is prohibited by law. Make sure lights,

reflectors and SMV emblem are clearly visible and

operating. Remove any obstructions such as dirt,

mud, stalks or residue that restricts view before

transporting.

Figure 4-13: Installed Transport Locks

Electrocution can occur without direct contact.

Failure to use transport lock pins during

transport may result in permanent equipment

damage, serious injury, or death.

2 X 16 TRANSPORT

LOCKOUT

L PIN

1/8 HAIR PIN

2130-translockon

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 96 97 98

Pas de commentaire

Landoll 2131 Wing Coulter Chisel Manuel d'utilisateur Page 90