Landoll 2131 Wing Coulter Chisel Manuel d'utilisateur télécharger pdf (Page 72)

3-36 F-721-0513 Edition

ASSEMBLY INSTRUCTIONS

Hydraulic Tubular Mount

Chopper Reel Installation

1. Install hydraulic chopper reels in the same manner

described for standard tubular mount chopper reels

(See “Standard Tubular Mount Chopper Reel

Installation (Option)” on page 3-32.)

2. Install hose mount plates onto rear tube of frame and

wing frame using 6-11/16 x 5-1/2 x 5/8-11 u-bolts and

flange head serrated nuts (See Figure 3-28.)

3. Install hose mount tubes to top of hose mount plates

using 2-3/4 x 4 x 5/8-11 u-bolts and flange head

serrated nuts.

4. Install 8 port manifold assembly to hose mount and

wing hose mount tubes using 1/2-13 x 4 hex head

cap screws and hex lock nuts. Orient manifold as

shown in Figures 3-26 and 3-27.

5. Install fittings and route hoses as shown in Figures

3-26, 3-28, 3-29, and 3-30.

NOTE

On wings with three arms, the center arm will be a

standard spring setup.

Figure 3-30: Hose Routing Inside Chopper Reel Arm

HYDRAULIC TUBULAR

MOUNT CHOPPER

REEL ARM ASSEMBLY

HOSES TO GO INSIDE

OF HARROW ARM

TUBE

45° ADAPTER

90° ADAPTER

chopper reel hose routing

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 97 98

Pas de commentaire

Landoll 2131 Wing Coulter Chisel Manuel d'utilisateur Page 72