Landoll 6230 Disc Manuel d'utilisateur télécharger pdf (Page 62)

3-36 F-440-0113 Edition

ASSEMBLY INSTRUCTIONS

Figure 3-27: Rear Tow Hitch Installation

Rear Tow Hitch (Option)

1. Attach the rear tow hitch assembly to the rear bar of

the center frame using rear tow hitch clamp plates,

5/8-11 x 6-1/2 hex head cap screws, and hex lock

nuts (See Figure 3-27.) The tow hitch should be

centered on the back bar of the frame.

2. Attach coupler mount bracket to the left side of the

rear tow hitch plate using 1/2-13 x 1-1/4 hex head

cap screws and hex lock nuts (See Figure 3-28.)

3. Pull tandem adapter harness through coupler mount

bracket and attach with 5/16-18 x 1 hex head cap

screws and hex lock nuts.

4. Connect female couplers, coupler dust plugs, 3/8 x

318 hose assemblies, and male couplers. Attach

hose assemblies between coupler mount bracket

and coupler plate using 3/8-16 x 2-1/2 hex head cap

screws and hex lock nuts.

5. Connect tandem adapter harness to the main

warning light harness and the enhanced lighting

module.

6. The hydraulic hoses will route along the left side of

the rear tow hitch, over the top of the back frame

tube on the disc and then follow the rest of the hoses

and hose loops to the front of the disc so they can

plug directly into the tractor.

rear hitch assy

REAR TOW HITCH

CLAMP PLATE

REAR TOW HITCH

PLATE

REAR TOW HITCH

ASSEMBLY

5/8-11 X 6-1/2 HEX

HEAD CAP SCREW

5/8-11 HEX LOCK

NUT

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 95 96

Pas de commentaire

Landoll 6230 Disc Manuel d'utilisateur Page 62